Firewood Cord Calculator
Hauling & Storage • • By Firewood Cord Calculator Team

How Much Firewood Fits in a Pickup Truck Bed? Exact Load & Weight Chart

Find out exactly how many cords of firewood fit in a 5.5 ft short bed, 6.5 ft standard bed, and 8 ft long bed pickup truck with level and heaped load charts.

How Much Firewood Fits in a Pickup Truck Bed? Exact Load & Weight Chart

One of the most common questions from firewood buyers is: “How much wood can I fit in my truck?” The answer depends on your truck’s bed length, whether you stack neatly or throw logs loosely, and the critical weight limits set by the vehicle manufacturer.

This guide gives you exact cubic-foot capacities, cord fractions, and weight safety limits for every standard pickup truck bed size.


Pickup Truck Bed Firewood Capacity Chart

All calculations below assume standard truck bed dimensions with the tailgate closed. Bed widths average approximately 5 feet (60 inches) between wheel wells, and bed height averages 21 inches to the top of the bed rail.

Level Load (Flush with Bed Rails)

Truck Bed LengthInterior Dimensions (L × W × H)Cubic FeetCords (÷ 128)
5.5 ft Short Bed5.5 × 4.5 × 1.75 ft~43 ft³~0.34 cord
6.5 ft Standard Bed6.5 × 4.5 × 1.75 ft~51 ft³~0.40 cord
8.0 ft Long Bed8.0 × 4.5 × 1.75 ft~63 ft³~0.49 cord

Heaped Load (Wood Stacked Above Rails)

Adding approximately 12 inches of wood above the bed rails (secured with ratchet straps or sidewall extensions) increases capacity substantially:

Truck Bed LengthHeaped VolumeCords (÷ 128)
5.5 ft Short Bed~57 ft³~0.45 cord
6.5 ft Standard Bed~68 ft³~0.53 cord
8.0 ft Long Bed~90 ft³~0.70 cord

Important: These volumes assume neatly stacked wood. If logs are thrown or tossed loosely into the bed, expect roughly 30%–40% less solid wood due to air gaps between randomly oriented pieces.

Calculate how many trips you need to haul a full or fractional cord with our Quarter Cord & Rick Calculator.


Stacked vs. Loose Thrown Loads

The way you load wood dramatically affects how much real volume you’re hauling:

Loading MethodPacking EfficiencyEffective Cord Fraction (6.5 ft Bed)
Neatly stacked (bark-side up, rows aligned)~100% of rated volume~0.40–0.53 cord
Carefully placed (mixed orientation, minimal gaps)~80%–85%~0.32–0.45 cord
Loosely tossed (thrown from ground level)~55%–65%~0.22–0.34 cord

A “thrown truckload” sold by a roadside dealer often contains only one-quarter to one-third of a full cord—far less than most buyers assume. This is why the standard cord measurement exists as a legal consumer protection.

Convert loose-thrown loads to stacked cord equivalents with our Loose Cord Calculator.


Weight Limits: The Critical Safety Factor

Volume capacity is only half the equation. Weight is usually the limiting factor when hauling firewood, especially dense green hardwoods.

Firewood Weight Per Full Cord by Species

SpeciesSeasoned Weight (per Cord)Green Weight (per Cord)
Shagbark Hickory~4,200 lbs~5,100 lbs
White Oak~3,900 lbs~5,500 lbs
Sugar Maple~3,600 lbs~4,700 lbs
White Ash~3,450 lbs~4,200 lbs
Red Pine~2,600 lbs~3,800 lbs

Truck Payload Ratings

Truck ClassTypical Payload CapacitySafe Firewood Load
½-ton (F-150, Silverado 1500, Ram 1500)1,200–2,000 lbs¼ to ½ cord of seasoned hardwood
¾-ton (F-250, Silverado 2500, Ram 2500)2,500–4,000 lbs½ to ¾ cord of seasoned hardwood
1-ton (F-350, Silverado 3500, Ram 3500)4,000–7,000 lbs¾ to 1 cord depending on species

How to Calculate Your Safe Load

  1. Find your truck’s payload capacity on the driver’s door jamb sticker (Gross Vehicle Weight Rating minus curb weight).
  2. Estimate the weight of your load: multiply the cord fraction by the per-cord weight for your species.
  3. Never exceed your payload rating. Overloaded trucks have longer braking distances, increased rollover risk, and can damage suspension, brakes, and tires.

Look up species-specific cord weight with our Cord Weight Calculator.


Half-Cord vs. Quarter-Cord Truck Loads

For homeowners buying smaller quantities or limited by a half-ton truck’s payload, fractional cord purchases are common:

FractionVolume (ft³)Typical Stack DimensionsFits In
¼ Cord32 ft³4 × 2 × 4 ftAny truck (level load)
⅓ Cord42.67 ft³4 × 1.33 × 8 ft (1 face cord)Short bed (level)
½ Cord64 ft³4 × 4 × 4 ft or 4 × 2 × 8 ftLong bed (heaped) or trailer
1 Full Cord128 ft³4 × 4 × 8 ftRequires 2–3 truck trips or trailer

Tips for Safe Firewood Hauling

  1. Stack neatly to maximize space: Lay split pieces bark-side up in tight rows. This also prevents shifting during transport.
  2. Use ratchet straps or bungee nets: Secure heaped loads with at least two ratchet straps crossing over the top of the load.
  3. Distribute weight evenly: Center the load over the rear axle and avoid stacking too high on one side.
  4. Lower tire pressure slightly: Some drivers inflate rear tires to the maximum sidewall rating when hauling heavy loads—consult your owner’s manual.
  5. Drive cautiously: Heavy loads increase braking distance by 25%–50%. Allow extra following distance and take turns slowly.
  6. Cover the load on highways: Use a cargo net to prevent split logs from bouncing out at highway speeds. Many states legally require load coverage for highway transport.

How Many Trips to Haul One Full Cord?

Truck Bed SizeStacked Load Per TripTrips for 1 Full Cord
5.5 ft Short Bed~0.35 cord~3 trips
6.5 ft Standard Bed~0.45 cord~2–3 trips
8 ft Long Bed~0.56 cord~2 trips
8 ft Bed + Heaped~0.70 cord~1.5 trips (2 trips safe)

Pro tip: If you burn 3–5 cords per winter, investing in a small utility trailer (4 × 8 ft bed) can halve your trip count and save significant fuel costs over a season.

Plan your exact haul with our free Firewood Cord Calculator and Cord Weight Calculator to verify your truck can safely handle the load.

Need to calculate firewood cords?

Use our free interactive calculator to verify stack volume, cords, and delivery prices.

Open Cord Calculator