Firewood Cord Calculator
Hauling & Payload Estimator

Average weight cord of firewood

Wood Specimen & Quantity USDA Forestry Data
1.00 Cord
1/4 Cord 1/2 Cord 1 Cord 2 Cords 4 Cords
Total Calculated Weight Seasoned Dry
Total Weight 4,200 pounds (lbs)
US Short Tons 2.10 tons (2,000 lbs/ton)
Metric Mass 1,905 kg 1.91 tonnes
Water Content Weight ~840 lbs evaporates during dry
Pickup Truck Payload Gauge Exceeds 3/4-Ton Bed
0 lbs 1/2-Ton (1.5k) 3/4-Ton (3.0k) 1-Ton (4.5k) 6k+
Payload Warning: At 4,200 lbs, 1 cord of seasoned White Oak will severely overload any standard 1/2-ton or 3/4-ton pickup truck bed. Do NOT haul in a single trip without a heavy tandem-axle trailer!

Firewood Weight Formulas, Specific Gravity & Moisture Physics

The weight of firewood is governed by two physical variables: cellular fiber density (specific gravity) and water moisture content (WMC). When green trees are freshly felled, internal cellular lumens are saturated with sap water, accounting for 45% to over 55% of total log weight.

Moisture Evaporation Loss Formula

Water Evaporated (lbs) = Green Cord Weight - Seasoned Cord Weight

White Oak: 5,570 lbs green - 4,200 lbs seasoned = 1,370 lbs (164 gal) of water expelled into the atmosphere.

Combustion Usable Energy Rule

Usable BTUs = Dry BTUs - (Water Weight × 1,050 BTU/lb latent heat)

Burning green wood wastes massive thermal energy vaporizing water rather than warming the home.

According to the USDA Forest Products Laboratory, dense hardwoods like Hickory and Oak produce high specific gravities (>0.60), resulting in cords that exceed 2 tons in weight. In contrast, coniferous softwoods like Pine feature lower cell densities (~0.35 specific gravity), weighing half as much when seasoned.

Firewood Species Weight & BTU Density Table

Wood Species Green Weight / Cord Seasoned Weight / Cord Weight Lost to Water Heat Output (Million BTUs)
Shagbark Hickory 5,200 lbs (2.60 tons) 4,460 lbs (2.23 tons) 740 lbs 27.7 MBTU
White Oak 5,570 lbs (2.79 tons) 4,200 lbs (2.10 tons) 1,370 lbs 25.7 MBTU
Sugar Maple (Hard) 4,960 lbs (2.48 tons) 3,890 lbs (1.95 tons) 1,070 lbs 24.0 MBTU
White Ash 4,320 lbs (2.16 tons) 3,690 lbs (1.85 tons) 630 lbs 23.6 MBTU
Black Cherry 4,130 lbs (2.07 tons) 3,120 lbs (1.56 tons) 1,010 lbs 20.0 MBTU
Eastern White Pine 3,550 lbs (1.78 tons) 2,250 lbs (1.13 tons) 1,300 lbs 14.3 MBTU

Vehicle Payload Safety, Trailer Towing & Seasoning Verification

1

Truck Bed Payload Realities

Standard 1/2-ton trucks (F-150, Silverado 1500) feature payload ratings of 1,400 to 1,900 lbs. Hauling more than 1/3 cord of hardwood overloads axles and violates DOT regulations. Use a 3/4-ton truck for 1/2 cord or a 1-ton truck for a full cord.

2

Tandem-Axle Trailer Towing

When hauling 1 to 2 cords of fresh or seasoned wood (4,000–9,000 lbs), always utilize a commercial tandem-axle trailer equipped with electric trailer brakes and DOT safety breakaway chains, balancing 60% of weight forward of trailer axles.

3

Moisture Content Verification

A light cord means dry wood, but verify with science: split a test piece using a hydraulic log splitter and press an EPA Burn Wise pin moisture meter into the center grain. True seasoned wood must read below 20% to prevent chimney creosote.

Frequently Asked Questions About Firewood Weight

How much does an average cord of seasoned firewood weigh?

A cord of seasoned hardwood (<20% moisture content) typically weighs between 3,500 and 4,500 pounds (1.75 to 2.25 US tons). Shagbark Hickory and White Oak weigh approximately 4,200 to 4,460 lbs per cord, while Sugar Maple weighs ~3,890 lbs. Seasoned softwoods like White Pine weigh around 2,250 lbs.

Can a half-ton pickup truck (F-150, Silverado 1500) carry a full cord of firewood?

No. A half-ton pickup truck typically has a maximum payload rating between 1,400 and 1,900 lbs. Attempting to haul a full cord (3,500 to 5,500 lbs) will severely overload the vehicle, blow out tires, crack rear leaf springs, and create hazardous braking conditions. A half-ton truck can safely carry approximately 1/3 to 1/2 cord per trip.

How much water weight is lost when green firewood seasons?

A single cord of dense green hardwood contains approximately 1,000 to 1,500 pounds of water (roughly 120 to 180 gallons). As fresh cut green logs dry from ~50% down to under 20% wood moisture content, this massive volume of water evaporates, making the wood significantly lighter to handle and drastically reducing chimney creosote.

How do I verify whether my firewood is truly seasoned without a scale?

Forestry experts and the EPA Burn Wise initiative recommend three diagnostic checks: 1) Visual radial cracking (checking) on log ends, 2) A sharp, resonant 'clacking' tone when two logs are struck together, and 3) An electrical pin-type wood moisture meter reading below 20% when pressed into freshly split heartwood.

Complete Calculation Suite

Specialized Firewood Calculators & Tools

Choose from our suite of precision calculators for accurate timber measurements, conversions, and delivery planning.

128 ft³ Standard

Full Cord Calculator

Standard 128 cu ft cord calculator with 3D stack visualizer, fraction converter, and cost estimator.

Single Row

Face Cord Calculator

Calculate exact face cords for 12, 16, 18, and 24-inch log lengths and compare against full cords.

Bulk / Dumped

Loose Cord Calculator

Convert dumped, tossed, or trailer-delivered bulk firewood into tightly stacked cord volume.

Multi-Unit

Cord to Cubic Feet Converter

Two-way converter between cords, cubic feet (ft³), cubic meters (m³ / stère), and ricks.

Lbs & Tons

Cord Weight Calculator

Estimate green and seasoned wood weight by species (Oak, Maple, Pine) with truck payload warnings.

Currently Active Tool
32 ft³ Rick

Quarter Cord (1/4) Calculator

Calculate 32 cu ft stack dimensions, rick equivalents, and check pickup truck bed capacity fit.